(v1) Ports/Pins/Lens Transfer Imports

Capability

The Ports/Pins/Lens Transfer Import allows a User to transfer all Ports/Pins/Lens on Cabling Equipment from one piece of Equipment to another. This allows a User to quickly retire multiple pieces of Equipment and setup the replacements. All Port qualities will be maintained, including if the Port is part of a Cable Path or connected to a Cable Pair/Strand. Note that the Import will transfer all ports, partial transfer is not supported. 

In the event of an error on a specific piece of Equipment, the Import Process will revert that Equipment to its previous state.

Fields

Orig Equipment ID

Required

Datatype is String.

The Equipment ID for the piece of Equipment where the Ports/Pins/Lens are currently located.

Orig Eqp Location

Datatype is Hierarchical String.

If multiple Records are found for the provided Orig Equipment ID, this is used to locate the desired one.

Orig Eqp Location Type

Datatype is String.

If multiple Orig Locations are found, this is used to determine the exact one that should be used.

Dest Equipment ID

Required

Datatype is String.

The Equipment ID for the desired piece of Equipment for the Ports/Pins/Lens to be moved to.

Dest Eqp Location

Datatype is Hierarchical String.

If multiple Records are found for the provided Dest Equipment ID, this is used to locate the desired one.

Dest Eqp Location Type

Datatype is String.

If multiple Dest Eqp Locations are found, this is used to determine the exact one that should be used.

Errors

When an Import Line fails, it is usually because the Line falls into one of the following categories:

1. The value provided from another table is Inactive

2. A blank value was provided, for a field with a required value

3. The value provided is not acceptable for the record type being created