Document toolboxDocument toolbox

Communication Parameters

Owned by Brian Dixon
Last updated: Jun 08, 2020 by Karis Hathaway (Deactivated)Version comment
2 min read

Avaya Parameters

AVAYA_SETTYPE_DIR

The full path to the directory that contains the set type configuration files.

AVAYA_SETTYPE_FEATURE_FILE

The full path to the configuration file that contains the various feature lists for Avaya set types.

Cisco Parameters

CISCO_INDIVIDUAL_TEMPLATES

CISCO_AUTO_INDIVIDUAL_TEMPLATES

CISCO_AUTOCOMPLETE_UNASSIGNED_DNS_ONLY

If true, auto-completion for the Directory Number on VOIP devices will only include currently unassigned Directory Numbers.

CISCO_DISPLAY_ONLY_FAULTS

If true, the Cisco Reconciliation Grid will only display discrepancies. Otherwise, all the results are displayed.

CISCO_AUTO_ASSIGN_ENDPOINT

When creating a SDA, will PCR-360 attempt to automatically choose an unused endpoint/port based on available Servicing Equipment for the SDA's Location.
All open/pending SDAs will be checked to ensure that auto-assign doesn't pick a port that is already slated to be provisioned.
Servicing Equipment must be assigned to the Location or one of its parents'. The search stops at the first parent with a gateway, regardless of whether it has ports available.

In such a case, it will return no ports available. If auto-assign is set to "enabled", the user could then pick a port on _any_ gateway, regardless of Location/SE.

  • disabled - Never attempts to auto-assign
  • enabled - Will auto-assign, but the user can select a different port if they wish
  • enforced - Will auto-aggin. User is unable to choose a different port

On SDA completion/provisioning, the port will be checked again to see if it's in use. If so:

  • disabled - Completion will fail. User will be notified.
  • enabled - Will attempt to find another port. If it can't completion will fail.
  • enforced - Will attempt to find another port. If it can't completion will fail.

CISCO_ENABLE_ANALOG_DEFAULTS

If true, will apply the default values for the Endpoint.

CISCO_DIALPLAN_NUM_DIGITS

When creating a Device (VOIP/Endpoint) on a SDA, this is the number of digits of the Service ID used for the DN on the 1st Line/Button.
Example: If the Service ID is 1234567890 and CISCO_DIALPLAN_NUM_DIGITS = 7, the applied DN will be 4567890
If this is set to 0, it will use all the digits.

Help Desk Portal - Email: help@pcr.com - Phone: 616.259.9242