{"type":"doc","content":[{"type":"paragraph","content":[{"text":"IMPORTANT: These instructions are only for upgrade installations only. If you are installing a new server, or do not want to run PHP 7.2 alongside an older version please see the ","type":"text","marks":[{"type":"strong"}]},{"text":"PHP 7.2 Install Instructions","type":"text","marks":[{"type":"strong"},{"type":"link","attrs":{"href":"https://pcr360.atlassian.net/wiki/spaces/pcr360wiki/pages/498730403"}}]}]},{"type":"paragraph","content":[{"text":"Additionally, REDHAT 8 does not auto configure php-fpm as it does in previous versions, so for REDHAT 8, these instructions should be used:","type":"text","marks":[{"type":"strong"}]}]},{"type":"bodiedExtension","attrs":{"layout":"full-width","extensionType":"com.atlassian.confluence.macro.core","extensionKey":"excerpt","parameters":{"macroParams":{"atlassian-macro-output-type":{"value":"INLINE"}},"macroMetadata":{"macroId":{"value":"e0ff55a2-b999-483b-8550-4d9bc841b268"},"schemaVersion":{"value":"1"},"title":"Excerpt"}},"localId":"faa47797-7792-46cb-a32c-159b116b4cc3"},"content":[{"type":"heading","attrs":{"level":1},"content":[{"text":"Note to Licensed Customers:","type":"text"}]},{"type":"paragraph","content":[{"text":"The following information represents the process we use to upgrade hosted installations. ","type":"text"}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The repos may vary depending the installation.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Licensed customers are welcome to use any repos they deem appropriate.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"All modules listed under \"Install the PHP modules required by PCR-360 \" are required for PCR-360 to function correctly.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The only optional modules are the installation-specific modules listed below the required ones.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Zend Guard Loader is not supported in PHP 7.2, is not included in the required modules, and may be safely removed.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"MCrypt has been deprecated in PHP 7.2, but is still available as an addon module.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"In PCR-360 version 2019.1, we will be removing the usage of MCrypt in favor of OpenSSL encryption. For version 2018.1, MCrypt is still a required module.","type":"text"}]}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Required PHP Modules","type":"text"}]},{"type":"table","attrs":{"layout":"full-width","width":1198.9944,"localId":"694ecb6e-8eee-40a0-8e77-4d1d4d11f190"},"content":[{"type":"tableRow","content":[{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"Name","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Description","type":"text","marks":[{"type":"strong"}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-process","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared objects which add support to PHP using system interfaces for inter-process communication.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-xml ","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared objects which add support to PHP for manipulating XML documents using the DOM tree, and performing XSL transformations on XML documents.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-pecl-apcu","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"APC Caching Support","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-gd ","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add support for using the gd graphics library to PHP.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-intl ","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add support for using the ICU library to PHP.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-mbstring","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add support for multi-byte string handling to PHP","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-pecl-mcrypt ","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Deprecated, but still currently required. Support for the mcrypt encryption API.","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-pdo","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add a database access abstraction layer to PHP. This module provides a common interface for accessing MySQL, PostgreSQL or other databases.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-soap","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add support to PHP for using the SOAP web services protocol.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-pecl-zip","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Library for processing zip files","type":"text"}]}]}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Optional PHP Modules","type":"text"}]},{"type":"table","attrs":{"layout":"default","localId":"3c8ae810-c9d1-4017-8444-4aed841f462e"},"content":[{"type":"tableRow","content":[{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[396.0]},"content":[{"type":"paragraph","content":[{"text":"Name","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[363.0]},"content":[{"type":"paragraph","content":[{"text":"Description","type":"text","marks":[{"type":"strong"}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[396.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-mysqlnd","type":"text","marks":[{"type":"subsup","attrs":{"type":"sup"}}]}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[363.0]},"content":[{"type":"paragraph","content":[{"text":"MySQL Support","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[396.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-oci8","type":"text","marks":[{"type":"subsup","attrs":{"type":"sup"}}]}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[363.0]},"content":[{"type":"paragraph","content":[{"text":"Oracle Support","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[396.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-ldap","type":"text","marks":[{"type":"subsup","attrs":{"type":"sup"}}]}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[363.0]},"content":[{"type":"paragraph","content":[{"text":"LDAP Support","type":"text"}]}]}]}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Required Packages","type":"text"}]},{"type":"table","attrs":{"layout":"default","width":1800.0,"localId":"c3154719-b94a-4a3f-af5b-5eb2e7a2ae73"},"content":[{"type":"tableRow","content":[{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[334.0]},"content":[{"type":"paragraph","content":[{"text":"Name","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[425.0]},"content":[{"type":"paragraph","content":[{"text":"Description","type":"text","marks":[{"type":"strong"}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[334.0]},"content":[{"type":"paragraph","content":[{"text":"php72","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[425.0]},"content":[{"type":"paragraph","content":[{"text":"The PHP 7.2 Package","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[334.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-fpm","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[425.0]},"content":[{"type":"paragraph","content":[{"text":"PHP 7.2 FPM Service","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[334.0]},"content":[{"type":"paragraph","content":[{"text":"mod_proxy_fcgi","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[425.0]},"content":[{"type":"paragraph","content":[{"text":"Apache Proxy Mod","type":"text"}]}]}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Upgrade Process","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Update all packages ","type":"text"}]},{"type":"codeBlock","content":[{"text":"yum update","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"In some cases you may see this error: ","type":"text"}]},{"type":"codeBlock","content":[{"text":"The GPG keys listed for the \"Percona-Release YUM repository - noarch\" repository are already installed but they are not correct for this package.\nCheck that the correct key URLs are configured for this repository.","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"To resolve, manually edit the repo file:","type":"text"}]},{"type":"codeBlock","content":[{"text":"vim /etc/yum.repos.d/percona-release.repo\n# change all instances of \ngpgcheck = 1\n# to\ngpgcheck = 0\n# save and close the file, then try to update again","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Reboot the server: ","type":"text"}]},{"type":"codeBlock","content":[{"text":"reboot now","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Make sure the EPEL repo is installed and active","type":"text"},{"type":"hardBreak"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The following file should exist: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"/etc/yum.repos.d/epel.repo","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"and contain the section ","type":"text"},{"text":"[epel]","type":"text","marks":[{"type":"strong"}]},{"text":" with the value ","type":"text"},{"text":"enabled=1","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"If not, install the repo ","type":"text"}]},{"type":"codeBlock","content":[{"text":"## RHEL/CentOS 6 64-Bit ##\n# wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm\n# rpm -ivh epel-release-6-8.noarch.rpm\n\n\n## RHEL/CentOS 7 64-Bit ##\n# wget http://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm\n# rpm -ivh epel-release-latest-7.noarch.rpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"},{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Install the remi-safe repo: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# Redhat 6 or CentOS 6\nyum -y install http://rpms.famillecollet.com/enterprise/remi-release-6.rpm\n\n# Redhat 7 or CentOS 7\nyum -y install http://rpms.famillecollet.com/enterprise/remi-release-7.rpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Install PHP 7.2, FPM for PHP 7.2, and the Apache FPM Mod ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"yum -y install php72 php72-php-fpm mod_proxy_fcgi","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Edit the php.ini file. This will typically be located at ","type":"text"},{"text":"/etc/opt/remi/php72/php.ini.","type":"text","marks":[{"type":"strong"}]},{"text":" The following lines need to be updated: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# Set max memory to 1 Gb\nmemory_limit = 1024M\n\n# Set the max file upload size to 10 Megabytes\nupload_max_filesize = 10M\n\n# This would need to be set to the timezone in which the Server is located\ndate.timezone = America/Detroit","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Install the PHP modules required by PCR-360 ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"yum -y install php72-php-process php72-php-xml php72-php-pecl-apcu php72-php-gd php72-php-intl php72-php-mbstring php72-php-pecl-mcrypt php72-php-pdo php72-php-soap php72-php-pecl-zip\n \n# Optional (installation dependant) Packages\n \n# MySql support\nyum -y install php72-php-mysqlnd\n \n# LDAP Support\nyum -y install php72-php-ldap","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"If you experience an issue with installing dependencies for the Modules, you will either need to compile them yourself, or install the centos repo: ","type":"text"}]},{"type":"codeBlock","content":[{"text":"vim /etc/yum.repos.d/centos.repo\n\n\n[centos]\nname=CentOS $releasever - $basearch\nbaseurl=http://ftp.heanet.ie/pub/centos/6/os/$basearch/\nenabled=1\ngpgcheck=0","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Install OCI8 Support ONLY if this is an Oracle Load:","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Support for this will require you ","type":"text"},{"text":"Update the Oracle Instant Client to at at least version 18.1","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"You will likely need to remove previous versions of SQL Plus ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# This command will vary depending on the version installed \nrpm -e oracle-instantclient12.1-sqlplus-12.1.0.2.0-1.x86_6","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Start Here: ","type":"text"},{"text":"Instant Client Install","type":"text","marks":[{"type":"link","attrs":{"href":"https://pcr360.atlassian.net/wiki/spaces/pcr360wiki/pages/498141111"}}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"T","type":"text","marks":[{"type":"link","attrs":{"href":"https://pcr360.atlassian.net/wiki/spaces/PCRIN/pages/17266319"}}]},{"text":"hen install the PHP72 Mod","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# Oracle Support\nyum -y install php72-php-oci8","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The defaults settings for PHP-FPM should be ok, but if you need to change anything (i.e. listening port), the config can be found at: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"/etc/opt/remi/php72/php-fpm.d/www.conf","type":"text"}]},{"type":"paragraph","content":[{"text":"The default listening port may be changed at the following line ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"listen = 127.0.0.1:9000","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Edit the Virtual Host configuration. This is generally located in the default Virtual Hosts directory: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"/etc/httpd/conf.d/.conf","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"For Apache Version 2.2","type":"text","marks":[{"type":"strong"}]},{"text":", two new directives need to be added:","type":"text"},{"type":"hardBreak"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The placement of the new lines is especially important in Shibboleth configurations","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Just below the ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" directive, add the ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" directive","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Just below the newly added ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" directive, add the ","type":"text"},{"text":"ProxyPassMatch ","type":"text","marks":[{"type":"strong"}]}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# DIRECTORY-based Setup: This is the most common used on customer loads\n\n # This is just an example ServerName. The value should already be present and does not need to be altered\n ServerName servername.domain.com \n\n ...\n\n \n \t...\n \n\n # Just below the directive, add the directive\n # Proxy to php72 on fpm\n \n Order allow,deny\n Allow from all\n \n\n # Just below the newly added directive, add the ProxyPassMatch \n ProxyPassMatch ^/(.*\\.php(/.*)?)$ fcgi://127.0.0.1:9000/var/www/pcr360/test/public/$1 disablereuse=off timeout=900\n \n ...\n","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"For Apache Version 2.4","type":"text","marks":[{"type":"strong"}]}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Tell PHP-FPM to listen to the socket. Edit ","type":"text"},{"text":"/etc/opt/remi/php72/php-fpm.d/www.conf","type":"text","marks":[{"type":"strong"}]},{"text":" and change the line ","type":"text"},{"text":"listen=","type":"text","marks":[{"type":"strong"}]},{"text":" ... to: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"listen = /var/run/php72.sock","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Find the","type":"text"},{"text":" listen.owner / .group / .mode","type":"text","marks":[{"type":"strong"}]},{"text":" lines and un-comment them. Also, change the ","type":"text"},{"text":"user","type":"text","marks":[{"type":"strong"}]},{"text":" & ","type":"text"},{"text":"group","type":"text","marks":[{"type":"strong"}]},{"text":" to whatever Apache runs as (usually \"apache\"). ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"listen.owner = apache\nlisten.group = apache\nlisten.mode = 0660","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Declare the proxy in a separate .conf file so we can re-use it. i.e. ","type":"text"},{"text":"/etc/httpd/conf.d/php72.conf ","type":"text","marks":[{"type":"strong"}]}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"\n ProxySet disablereuse=off\n ProxySet timeout=900\n","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Edit the PCR360 ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" and add the ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" & ","type":"text"},{"text":"SetHandler","type":"text","marks":[{"type":"strong"}]},{"text":": ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"\n # This is just an example ServerName. The value should already be present and does not need to be altered\n ServerName servername.domain.com \n ...\n \n SetHandler proxy:fcgi://php-fpm72\n \n ...\n","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Start the FPM service ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# RedHat 6 and CentOS 6\nservice php72-php-fpm start\n\n# RedHat 7 and CentOS 7\nsystemctl start php72-php-fpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Verify the the service is listening on the configured port (default is 9000). ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"netstat -plnt\n \nProto Recv-Q Send-Q Local Address Foreign Address State PID/Program name\ntcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 4262/php-fpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Enable the FPM service. Restart Apache and PHP ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# RedHat 6 and CentOS 6\nchkconfig php72-php-fpm on && service httpd restart && service php72-php-fpm restart\n\n# RedHat 7 and CentOS 7\nsystemctl enable httpd php72-php-fpm && systemctl restart httpd php72-php-fpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The application code can now be updated to version 2018.1+","type":"text"}]}]}]},{"type":"paragraph","content":[{"text":"IMPORTANT: These instructions are only for upgrade installations only. If you are installing a new server, or do not want to run PHP 7.2 alongside an older version please see the ","type":"text","marks":[{"type":"strong"}]},{"text":"PHP 7.2 Install Instructions","type":"text","marks":[{"type":"strong"},{"type":"link","attrs":{"href":"https://pcr360.atlassian.net/wiki/spaces/pcr360wiki/pages/498730403"}}]}]},{"type":"paragraph","content":[{"text":"Additionally, REDHAT 8 does not auto configure php-fpm as it does in previous versions, so for REDHAT 8, these instructions should be used:","type":"text","marks":[{"type":"strong"}]}]},{"type":"bodiedExtension","attrs":{"layout":"full-width","extensionType":"com.atlassian.confluence.macro.core","extensionKey":"excerpt","parameters":{"macroParams":{"atlassian-macro-output-type":{"value":"INLINE"}},"macroMetadata":{"macroId":{"value":"87d312dc-6b50-48ab-ad7e-bbc10caf8adf"},"schemaVersion":{"value":"1"},"title":"Excerpt"}},"localId":"34cd55d1-cbbc-4f8d-8af6-525d990ea06e"},"content":[{"type":"heading","attrs":{"level":1},"content":[{"text":"Note to Licensed Customers:","type":"text"}]},{"type":"paragraph","content":[{"text":"The following information represents the process we use to upgrade hosted installations. ","type":"text"}]},{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The repos may vary depending the installation.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Licensed customers are welcome to use any repos they deem appropriate.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"All modules listed under \"Install the PHP modules required by PCR-360 \" are required for PCR-360 to function correctly.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The only optional modules are the installation-specific modules listed below the required ones.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Zend Guard Loader is not supported in PHP 7.2, is not included in the required modules, and may be safely removed.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"MCrypt has been deprecated in PHP 7.2, but is still available as an addon module.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"In PCR-360 version 2019.1, we will be removing the usage of MCrypt in favor of OpenSSL encryption. For version 2018.1, MCrypt is still a required module.","type":"text"}]}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Required PHP Modules","type":"text"}]},{"type":"table","attrs":{"layout":"full-width","width":1198.9944,"localId":"4e5c1b0c-bced-4e9a-9e43-19ef1603d4ae"},"content":[{"type":"tableRow","content":[{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"Name","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Description","type":"text","marks":[{"type":"strong"}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-process","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared objects which add support to PHP using system interfaces for inter-process communication.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-xml ","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared objects which add support to PHP for manipulating XML documents using the DOM tree, and performing XSL transformations on XML documents.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-pecl-apcu","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"APC Caching Support","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-gd ","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add support for using the gd graphics library to PHP.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-intl ","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add support for using the ICU library to PHP.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-mbstring","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add support for multi-byte string handling to PHP","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-pecl-mcrypt ","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Deprecated, but still currently required. Support for the mcrypt encryption API.","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-pdo","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add a database access abstraction layer to PHP. This module provides a common interface for accessing MySQL, PostgreSQL or other databases.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-soap","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Dynamic shared object that will add support to PHP for using the SOAP web services protocol.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#000000"}}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[298.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-pecl-zip","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[1250.0]},"content":[{"type":"paragraph","content":[{"text":"Library for processing zip files","type":"text"}]}]}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Optional PHP Modules","type":"text"}]},{"type":"table","attrs":{"layout":"default","localId":"0f5bbefe-a89f-4e2a-925e-8782659d7557"},"content":[{"type":"tableRow","content":[{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[396.0]},"content":[{"type":"paragraph","content":[{"text":"Name","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[363.0]},"content":[{"type":"paragraph","content":[{"text":"Description","type":"text","marks":[{"type":"strong"}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[396.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-mysqlnd","type":"text","marks":[{"type":"subsup","attrs":{"type":"sup"}}]}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[363.0]},"content":[{"type":"paragraph","content":[{"text":"MySQL Support","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[396.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-oci8","type":"text","marks":[{"type":"subsup","attrs":{"type":"sup"}}]}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[363.0]},"content":[{"type":"paragraph","content":[{"text":"Oracle Support","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[396.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-ldap","type":"text","marks":[{"type":"subsup","attrs":{"type":"sup"}}]}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[363.0]},"content":[{"type":"paragraph","content":[{"text":"LDAP Support","type":"text"}]}]}]}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Required Packages","type":"text"}]},{"type":"table","attrs":{"layout":"default","width":1800.0,"localId":"8a5be3bb-1aec-4866-9b9a-cdaa963825c0"},"content":[{"type":"tableRow","content":[{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[334.0]},"content":[{"type":"paragraph","content":[{"text":"Name","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"tableHeader","attrs":{"colspan":1,"rowspan":1,"colwidth":[425.0]},"content":[{"type":"paragraph","content":[{"text":"Description","type":"text","marks":[{"type":"strong"}]}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[334.0]},"content":[{"type":"paragraph","content":[{"text":"php72","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[425.0]},"content":[{"type":"paragraph","content":[{"text":"The PHP 7.2 Package","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[334.0]},"content":[{"type":"paragraph","content":[{"text":"php72-php-fpm","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[425.0]},"content":[{"type":"paragraph","content":[{"text":"PHP 7.2 FPM Service","type":"text"}]}]}]},{"type":"tableRow","content":[{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[334.0]},"content":[{"type":"paragraph","content":[{"text":"mod_proxy_fcgi","type":"text"}]}]},{"type":"tableCell","attrs":{"colspan":1,"rowspan":1,"colwidth":[425.0]},"content":[{"type":"paragraph","content":[{"text":"Apache Proxy Mod","type":"text"}]}]}]}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Upgrade Process","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Update all packages ","type":"text"}]},{"type":"codeBlock","content":[{"text":"yum update","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"In some cases you may see this error: ","type":"text"}]},{"type":"codeBlock","content":[{"text":"The GPG keys listed for the \"Percona-Release YUM repository - noarch\" repository are already installed but they are not correct for this package.\nCheck that the correct key URLs are configured for this repository.","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"To resolve, manually edit the repo file:","type":"text"}]},{"type":"codeBlock","content":[{"text":"vim /etc/yum.repos.d/percona-release.repo\n# change all instances of \ngpgcheck = 1\n# to\ngpgcheck = 0\n# save and close the file, then try to update again","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Reboot the server: ","type":"text"}]},{"type":"codeBlock","content":[{"text":"reboot now","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Make sure the EPEL repo is installed and active","type":"text"},{"type":"hardBreak"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The following file should exist: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"/etc/yum.repos.d/epel.repo","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"and contain the section ","type":"text"},{"text":"[epel]","type":"text","marks":[{"type":"strong"}]},{"text":" with the value ","type":"text"},{"text":"enabled=1","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"If not, install the repo ","type":"text"}]},{"type":"codeBlock","content":[{"text":"## RHEL/CentOS 6 64-Bit ##\n# wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm\n# rpm -ivh epel-release-6-8.noarch.rpm\n\n\n## RHEL/CentOS 7 64-Bit ##\n# wget http://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm\n# rpm -ivh epel-release-latest-7.noarch.rpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"},{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Install the remi-safe repo: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# Redhat 6 or CentOS 6\nyum -y install http://rpms.famillecollet.com/enterprise/remi-release-6.rpm\n\n# Redhat 7 or CentOS 7\nyum -y install http://rpms.famillecollet.com/enterprise/remi-release-7.rpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Install PHP 7.2, FPM for PHP 7.2, and the Apache FPM Mod ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"yum -y install php72 php72-php-fpm mod_proxy_fcgi","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Edit the php.ini file. This will typically be located at ","type":"text"},{"text":"/etc/opt/remi/php72/php.ini.","type":"text","marks":[{"type":"strong"}]},{"text":" The following lines need to be updated: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# Set max memory to 1 Gb\nmemory_limit = 1024M\n\n# Set the max file upload size to 10 Megabytes\nupload_max_filesize = 10M\n\n# This would need to be set to the timezone in which the Server is located\ndate.timezone = America/Detroit","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Install the PHP modules required by PCR-360 ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"yum -y install php72-php-process php72-php-xml php72-php-pecl-apcu php72-php-gd php72-php-intl php72-php-mbstring php72-php-pecl-mcrypt php72-php-pdo php72-php-soap php72-php-pecl-zip\n \n# Optional (installation dependant) Packages\n \n# MySql support\nyum -y install php72-php-mysqlnd\n \n# LDAP Support\nyum -y install php72-php-ldap","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"If you experience an issue with installing dependencies for the Modules, you will either need to compile them yourself, or install the centos repo: ","type":"text"}]},{"type":"codeBlock","content":[{"text":"vim /etc/yum.repos.d/centos.repo\n\n\n[centos]\nname=CentOS $releasever - $basearch\nbaseurl=http://ftp.heanet.ie/pub/centos/6/os/$basearch/\nenabled=1\ngpgcheck=0","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Install OCI8 Support ONLY if this is an Oracle Load:","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Support for this will require you ","type":"text"},{"text":"Update the Oracle Instant Client to at at least version 18.1","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"You will likely need to remove previous versions of SQL Plus ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# This command will vary depending on the version installed \nrpm -e oracle-instantclient12.1-sqlplus-12.1.0.2.0-1.x86_6","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Start Here: ","type":"text"},{"text":"Instant Client Install","type":"text","marks":[{"type":"link","attrs":{"href":"https://pcr360.atlassian.net/wiki/spaces/pcr360wiki/pages/498141111"}}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"T","type":"text","marks":[{"type":"link","attrs":{"href":"https://pcr360.atlassian.net/wiki/spaces/PCRIN/pages/17266319"}}]},{"text":"hen install the PHP72 Mod","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# Oracle Support\nyum -y install php72-php-oci8","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The defaults settings for PHP-FPM should be ok, but if you need to change anything (i.e. listening port), the config can be found at: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"/etc/opt/remi/php72/php-fpm.d/www.conf","type":"text"}]},{"type":"paragraph","content":[{"text":"The default listening port may be changed at the following line ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"listen = 127.0.0.1:9000","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Edit the Virtual Host configuration. This is generally located in the default Virtual Hosts directory: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"/etc/httpd/conf.d/.conf","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"For Apache Version 2.2","type":"text","marks":[{"type":"strong"}]},{"text":", two new directives need to be added:","type":"text"},{"type":"hardBreak"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The placement of the new lines is especially important in Shibboleth configurations","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Just below the ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" directive, add the ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" directive","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Just below the newly added ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" directive, add the ","type":"text"},{"text":"ProxyPassMatch ","type":"text","marks":[{"type":"strong"}]}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# DIRECTORY-based Setup: This is the most common used on customer loads\n\n # This is just an example ServerName. The value should already be present and does not need to be altered\n ServerName servername.domain.com \n\n ...\n\n \n \t...\n \n\n # Just below the directive, add the directive\n # Proxy to php72 on fpm\n \n Order allow,deny\n Allow from all\n \n\n # Just below the newly added directive, add the ProxyPassMatch \n ProxyPassMatch ^/(.*\\.php(/.*)?)$ fcgi://127.0.0.1:9000/var/www/pcr360/test/public/$1 disablereuse=off timeout=900\n \n ...\n","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"For Apache Version 2.4","type":"text","marks":[{"type":"strong"}]}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Tell PHP-FPM to listen to the socket. Edit ","type":"text"},{"text":"/etc/opt/remi/php72/php-fpm.d/www.conf","type":"text","marks":[{"type":"strong"}]},{"text":" and change the line ","type":"text"},{"text":"listen=","type":"text","marks":[{"type":"strong"}]},{"text":" ... to: ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"listen = /var/run/php72.sock","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Find the","type":"text"},{"text":" listen.owner / .group / .mode","type":"text","marks":[{"type":"strong"}]},{"text":" lines and un-comment them. Also, change the ","type":"text"},{"text":"user","type":"text","marks":[{"type":"strong"}]},{"text":" & ","type":"text"},{"text":"group","type":"text","marks":[{"type":"strong"}]},{"text":" to whatever Apache runs as (usually \"apache\"). ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"listen.owner = apache\nlisten.group = apache\nlisten.mode = 0660","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Declare the proxy in a separate .conf file so we can re-use it. i.e. ","type":"text"},{"text":"/etc/httpd/conf.d/php72.conf ","type":"text","marks":[{"type":"strong"}]}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"\n ProxySet disablereuse=off\n ProxySet timeout=900\n","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Edit the PCR360 ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" and add the ","type":"text"},{"text":"","type":"text","marks":[{"type":"strong"}]},{"text":" & ","type":"text"},{"text":"SetHandler","type":"text","marks":[{"type":"strong"}]},{"text":": ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"\n # This is just an example ServerName. The value should already be present and does not need to be altered\n ServerName servername.domain.com \n ...\n \n SetHandler proxy:fcgi://php-fpm72\n \n ...\n","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}]}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Start the FPM service ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# RedHat 6 and CentOS 6\nservice php72-php-fpm start\n\n# RedHat 7 and CentOS 7\nsystemctl start php72-php-fpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Verify the the service is listening on the configured port (default is 9000). ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"netstat -plnt\n \nProto Recv-Q Send-Q Local Address Foreign Address State PID/Program name\ntcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 4262/php-fpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Enable the FPM service. Restart Apache and PHP ","type":"text"}]},{"type":"codeBlock","attrs":{"language":"shell"},"content":[{"text":"# RedHat 6 and CentOS 6\nchkconfig php72-php-fpm on && service httpd restart && service php72-php-fpm restart\n\n# RedHat 7 and CentOS 7\nsystemctl enable httpd php72-php-fpm && systemctl restart httpd php72-php-fpm","type":"text"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The application code can now be updated to version 2018.1+","type":"text"}]}]}]}],"version":1}

Browser not supported