...
Considering the high volume of Cables employed by a modern business, it is typically much easier to manage Cables in bulk. To bulk Create or Edit Pairs/Strands, select the cable in the Cable Maintenance grid, and click the
button. Then use the section labeled Pairs/Strands.In this section, the User can input the new cable's origination and destination equipment – that is, what the cables are plugged into on either end. To select a piece of origination or destination equipment, click on the Search Icon (
) in the 'Equipment' data field. This opens a list of the User organization's Equipment from which the User can select the appropriate equipment....
Once the User has defined the appropriate origination and destination equipment, the next step is to define the number of Pairs/Strands and add further identification information. In the data field labeled Low, enter the '1' to indicate that there is at least one strand/pair in the cable. In the data field labeled High, enter the maximum number of strands/pairs that is applied to the cable. For example, if a User wants to input 10 strands/pairs, the appropriate Low/High input would be 1/10.
...
To access this form, from the Cable Maintenance grid, click the
button.This brings up the 'Manage Cable' dialog.
Select the Cable to transfer to.
4. Select the Low range to be associated with the moved Cable.
5. Click the button.
...
Click the button.
This opens the 'Add New Access Points' form.
Enter the information into the fields if desired.
Click the button.
...
Click the button.
This opens the 'Existing Access Points' form.
Select the Access Point(s) desired.
Click the button.
...
Click the button.
This opens the 'Add New Cable' form.
Click the button.
...
Click the button.
This opens the 'Existing Conduits' form.
Select the Conduit(s) desired.
Click the button.
...