Table of Contents | ||||
---|---|---|---|---|
|
Navigate to the Cable Maintenance Grid. Main > Cable > Cable Maintenance (see Cable module navigation).
...
To add a new cable to the Cable Maintenance Grid, click the
button on the Grid Toolbar above the Grid. This opens a Cable Maintenance data entry form.The User must first input data into the Required fields. In this case, the User must input the Cable Name and choose a Cable Type from a drop-down list of default options. At this point, the User can choose to add in-depth identification information, including Length (feet) and Signal Loss (decibels). The greyed-out data fields are automatically generated when the User adds specific Pairs/Strands to the newly created cable.
Include Page | ||||
---|---|---|---|---|
|
Saving a New Cable
Upon fulfilling all the Required fields, clickAdding a Cable section. Most importantly, the PCR-360 application automatically generates the new cable's pairs/strands information in a previously absent data entry form tab entitled Pairs and Strands (see Managing pairs and strands below).
at the bottom of the Cable data entry form. This action results in three distinct outcomes. First, the new Cable is visible in the original Cable Maintenance Grid. Second, the PCR-360 application automatically generates inputs for the greyed-out data entry form data fields referenced in theBulk Adding Pairs/Strands to a Cable
Considering the high volume of Cables employed by a modern business, it is typically much easier to manage Cables in bulk. To bulk Create or Edit Pairs/Strands, select the cable in the Cable Maintenance grid, and click the
button. Then use the section labeled Pairs/Strands.In this section, the User can input the new cable's origination and destination equipment – that is, what the cables are plugged into on either end. To select a piece of origination or destination equipment, click on the Search Icon (
) in the 'Equipment' data field. This opens a list of the User organization's Equipment from which the User can select the appropriate equipment....
After the User indicates the number of Pairs/Strands applied to the cable, the Cable data entry form automatically updates to reflect the changes. The 'Status' drop-down menu, for example, becomes a Required field as well as the Origination Equipment from which the pairs/strands begin. Critically, the tab labeled 'Pairs/Strands' also appears and lists each pair/strand in a Grid format (see Managing pairs and strands below).
Status
More information on Pair/Strand statuses is available here
...
This button allows the User to Transfer a range of existing Pairs/Strands from one Cable to another.
To access this form, from the Cable Maintenance grid, click the button.
This brings up the 'Manage Cable' dialog.
Select the Cable to transfer to.
4. Select the Low range to be associated with the moved Cable.
5. Click the
button.All Pairs/Strands in the range will be transferred from the Origination (Transfer from) to the Destination (Transfer to) Cable.
...
The 'Access Points' tab allows the User to associate Access Points with a Cable. The User can 'Add' a new Access Point from this tab or 'Add Existing' Access Point(s) from the Access Points Grid.
Add
Click the button.
This opens the 'Add New Access Points' form.
Enter the information into the fields if desired.
Click the button.
The Access Point is added to the 'Cable' as well as the Access Points Grid.
Add Existing
Click the button.
This opens the 'Existing Access Points' form.
Select the Access Point(s) desired.
Click the button.
The Access Point is added to the 'Cable' from the Access Points Grid.
...
The 'Conduit' tab allows the User to associate Conduit with a Cable. The User can 'Add' a new Conduit from this tab or 'Add Existing' Conduit from the Cable Maintenance Grid.
Add
Click the button.
This opens the 'Add New Cable' form.
Click the button.
The Conduit is added to the 'Cable Maintenance' as well as the Conduits Grid. When Conduit is deleted from the Cable Maintenance Grid, the Conduit remains on the Conduits Grid since there is only an association record on the Cable Maintenance Grid.
Add Existing
Click the button.
This opens the 'Existing Conduits' form.
Select the Conduit(s) desired.
Click the button.
The Conduit is added to the 'Cable Maintenance' from the Conduits Grid.
Child pages (Children Display) | ||||
---|---|---|---|---|
|