...
For a PCR-360 User, setting up and managing Access Points is a virtually identical process to that outlined in the Cable article, Conduits.
Table of Contents | ||||
---|---|---|---|---|
|
Anchor | ||||
---|---|---|---|---|
|
...
At this point, the User can fill the data fields appropriately (Note: as was the case in the Cable Conduit section, Adding a Conduit, only 'Name' and 'Access Point Type' are required fields). Options include 'Location' and 'Description'.
...
This opens an Access Point data entry form that displays identical data fields to those discussed in the Adding an Access Point section. Complete all required fields and click 'Save' to make changes permanent.
...
The 'Conduit' tab allows the User to associate Conduit with an Access Point. The User can 'Add' a new Conduit from this tab or 'Add Existing' Conduit from the Conduits grid.
Add
Click the Add button.
This opens the 'Add New Conduit' form.
Enter the 'Name' and 'Conduit Type' required fields.
Enter additional information into the fields if desired.
Click the 'Save New' button.
...
View file name UNKNOWN_ATTACHMENT
The Conduit is added to the 'Access Point' as well as the Conduits Grid. When Conduit is deleted from the Access Point Grid, the Conduit will remain on the Conduits Grid since there is only an association record on the Access Point Grid.
Add Existing
Click the Add Existing button.
This opens the 'Existing Conduits' form.
Select the Conduit(s) desired.
Click the 'Save and Close' button.
...
View file name UNKNOWN_ATTACHMENT
The Conduit is added to the 'Access Point' from the Conduits grid. When Conduit is deleted from the Access Point Grid, the Conduit will remain on the Conduits Grid since there is only an association record on the Access Point Grid.
...
The 'Cables' tab allows the User to associate Cable with an Access Point. The User can 'Add' a new Cable from this tab or 'Add Existing' Cable(s) from the Cable Maintenance Grid.
Add
Click the Add button.
This opens the 'Add New Cable' form.
Enter the information into the fields if desired.
Click the 'Save New' button.
The Cable is added to the 'Access Point' as well as the Cable Maintenance Grid. When Cable is deleted from the Access Point grid, the Cable remains on the Cable Maintenance Grid since there is only an association record on the Access Point Grid.
Add Existing
Click the Add Existing button.
This opens the 'Existing Cables' form.
Select the Cable(s) desired.
Click the 'Save and Close' button.
The Conduit is added to the 'Access Point' from the Cable Maintenance Grid. When Cable is deleted from the Access Point Grid, the Cable remains on the Cable Maintenance Grid since there is only an association record on the Access Point Grid.
Child pages (Children Display) | ||||
---|---|---|---|---|
|