...
PHP 7.4 is not available from any repo on RedHat 6 or CentOS 6. The highest version it can be upgraded to is PHP 7.3.
For customers running PCR-360 Versions 2018.1 through 2020.2, PHP 7.2 is required.
...
For customers running PCR-360 Versions 2022.1 or later, PHP 7.4 or PHP 8.1 may be installed
Preparation
Update the installed packages
Code Block |
---|
|
# get rooted
sudo su
# apply the cream
yum -y update
# If you run into a GPG key issue with the percona repo (or another package), reinstall the repo it and try to update again
# Example
sudo yum install https://repo.percona.com/yum/percona-release-latest.noarch.rpm
yum -y update |
...
RHEL 8 / CentOS 8
Code Block |
---|
|
# these are probably already installed
dnf install https://rpms.remirepo.net/enterprise/remi-release-8.rpm
dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm |
RHEL 7 / CentOS 7
Code Block |
---|
|
# these are probably already installed
wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
wget http://rpms.remirepo.net/enterprise/remi-release-7.rpm
rpm -Uvh remi-release-7.rpm epel-release-latest-7.noarch.rpm
# RHEL ONLY
subscription-manager repos --enable=rhel-7-server-optional-rpms |
RHEL 6 / CentOS 6
Code Block |
---|
|
# remove the old repo without php7.4
yum remove remi-release
# add the new repo with php7.4
rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm
# RHEL only
rhn-channel --add --channel=rhel-$(uname -i)-server-optional-6 |
...
Disable the previously installed PHP Version
Code Block |
---|
|
# remove any prefixed installs
# yum remove php[VERSION_NUMBER]*
dnf remove php7*
# if not already installed
dnf install dnf-utils
# Use the line corresponding to the currently installed version
dnf module disable php:remi-5.6
dnf module disable php:remi-7.0
dnf module disable php:remi-7.1
dnf module disable php:remi-7.2
dnf module disable php:remi-7.3
dnf module disable php:remi-7.4 |
Reset PHP and enable the new version
Code Block |
---|
|
dnf module reset php
# try to enable php from the RHEL repo first.
dnf module enable php:<version number>
# example
dnf module enable php:8.1
#if it's not working/available, try remi
dnf module enable php:remi-<version_number>
#example
dnf module enable php:remi-8.1 |
...
Disable the previously installed PHP Version
Code Block |
---|
|
# remove any prefixed installs
# yum remove php[VERSION_NUMBER]*
yum remove php72*
# if not already installed
yum install yum-utils
# Use the line corresponding to the currently installed version
yum-config-manager --disable remi-php56
yum-config-manager --disable remi-php70
yum-config-manager --disable remi-php71
yum-config-manager --disable remi-php72
yum-config-manager --disable remi-php73 |
Enable the new PHP version
Code Block |
---|
|
yum-config-manager --enable remi-php<version>
#exmaple
yum-config-manager --enable remi-php81
|
...
To upgrade from previous php version :
Code Block |
---|
|
# install required php modules
dnf -y install php php-process php-xml php-pecl-apcu php-gd php-intl php-mbstring php-pecl-mcrypt php-pdo php-soap php-pecl-zip
# MySql support
dnf -y install php-mysqlnd
# LDAP Support
dnf -y install php-ldap
# Oracle support
yum -y install php-oci8
# this should update all installed PHP modules as well
dnf -y update |
...
To upgrade from previous php version:
Code Block |
---|
|
# install required php modules
yum -y install php php-process php-xml php-pecl-apcu php-gd php-intl php-mbstring php-pecl-mcrypt php-pdo php-soap php-pecl-zip
# MySql support
yum -y install php-mysqlnd
# LDAP Support
yum -y install php-ldap
# Oracle support
yum -y install php-oci8
# this should update all installed PHP modules as well
yum -y update
|
Update the PHP INI
Code Block |
---|
|
vim /etc/php.ini
# Update each line as specified
# Set max memory to 1 Gb
memory_limit = 1024M
# Set the max file upload size to 10 Megabytes
upload_max_filesize = 10M
# This would need to be set to the timezone in which the Server is located
date.timezone = America/Detroit |
STEP 4: Verify thcorrect version is Installed
Code Block |
---|
|
# This may vary depending on version installed, Just need to make sure the intended version is installed
php -v
[root@server ~]# php -v
PHP 7.4.2 (cli) (built: Jan 21 2020 11:35:20) ( NTS )
Copyright (c) The PHP Group
Zend Engine v3.4.0, Copyright (c) Zend Technologies
with Zend OPcache v7.4.2, Copyright (c), by Zend Technologies
|
Step 5: Restart Apache and PHP-FPM
RHEL 8, 7 and Centos 8, 7
Code Block |
---|
|
systemctl restart httpd;
# if applicable (usually only needed for RHEL)
systemctl restart php-fpm;
|
RHEL6 and Centos 6
Code Block |
---|
|
service httpd restart
# if applicable (usually only needed for RHEL)
service php-fpm restart
|
Troubleshooting the Upgrade
Because external customer owned servers are not maintained by PCR and often vary in their installations, these instruction may not work exactly as written.
Based on customer experiences running the upgrade, here some issue that may occur and how to resolve them:
...
The Zend Guard Loader PHP Extension is no longer used by PCR-360 and does not need to be reinstalled after removal. The extension may be safely removed if it remains after removing the previous version of PHP. These file paths may vary depending on the installation.
Code Block |
theme |
---|
RDark | # prevent php from trying to load the extension
rm /etc/php.d/ZendGuardLoader.ini
# remove the extension from the system
rm /usr/lib64/php/modules/ZendGuardLoader.so |
...
This can apply to any version. The old php module settings should be removed when installing, but this is not the case with some installations. In this instance, the settings file may need to be updated or removed manually. These file paths may vary depending on the installation.
Code Block |
---|
theme | RDark |
---|
// remove the old PHP module default settings
rm /etc/httpd/conf.d/php<version>.conf
#example
rm /etc/httpd/conf.d/php74.conf |
The error may also occur if a the previous PHP installation was using a proxy to connect to to Apache. In this case the virtual host may need to be manually updated. To do this, first open the appropriate virtual host file (These file paths may vary depending on the installation):
Code Block |
---|
|
# test environment
vi /etc/httpd/conf.d/pcr360_test.conf
# production environment
vi /etc/httpd/conf.d/pcr360_prod.conf |
Now look for and remove (or comment out) the following (or similar) lines. Then save the file and restart Apache. This line may appear multiple times if multiple virtual hosts are configured and may have more or longer parameters for the SetHandler method.
Code Block |
---|
|
#<FilesMatch \.php$>
# SetHandler proxy:fcgi://php-fpm74
#</FilesMatch> |
...
If PHP was configured to use multiple versions , the CRON jobs may have been set to use a non standard executable. In this case the old executable (ex. /usr/bin/php72) may no longer exist and needs to be updated to the standard executable 'php'.
Code Block |
---|
|
#edit the crontab as root
crontab -e
# for example, change a line like this
* * * * * /usr/bin/php72 /var/www/pcr360/prod/cli/zfcli.php -a cron.events.process -e prod -n 19 -i /var/www/pcr360/configs/pcr360.ini 1>> /var/www/pcr360/prod/logs/cron.log 2>&1
# to this
* * * * * php /var/www/pcr360/prod/cli/zfcli.php -a cron.events.process -e prod -n 19 -i /var/www/pcr360/configs/pcr360.ini 1>> /var/www/pcr360/prod/logs/cron.log 2>&1 |
PHP Extensions
Include Page |
---|
| (2024.1) PHP Extensions |
---|
| (2024.1) PHP Extensions |
---|
|