Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

This is a listing of all the tabs a User might encounter in the 'Location' Catalog. To access the Locations Catalog navigate to Main > Catalog > Locations.

Remarks

The 'Remarks' tab allows the User to associate notes relevant to the Location and can serve as a method of noting any important information relating to the Location such as important events that occurred and their timing.

  1. To 'Add' a Remark, click the 'Add' button. 
  2. Fill in the 'Remark' field with any information desired.
  3. Click the 'Save New' button. 

Once a Remark has been created, a User can double click to view the full contents or click the 'Edit Selected' button. If new information is desired to be saved, it is recommended that the User should create a new Remark with the 'Add' functionality rather then edit an old Remark to preserve a record of the old Remarks.

If a Remark is no longer pertinent and the User wishes to remove it, simply select the Remark and click the 'Delete Selected' button.  The Remark is permanently removed from PCR-360.

Table of Contents

Contacts

The 'Contacts' tab provides the User the ability to manually associate Contacts with a Location. These Contacts represent people who may be associated with the Location. These Contacts are separate entries in the Workers/Contacts section of the application that can be associated with this Location for tracking purposes.

The User can manually manage these associations by using the 'Add', 'Add Existing', 'Edit Selected', and 'Delete Selected' functionality.

Adding New Contacts

After clicking on the Add button, the User is presented with a data-entry form used to build a basic Contact: First and Last Name, Email, and Phone Number. Adding a new contact here creates a new record in the Workers/Contacts section of the application.

Adding Existing Contacts

After clicking the Add Existing button,  a list of existing contacts is presented. Contacts can be associated with multiple Locations. This list displays all Active Contacts in the system. Searching through this list and selecting multiple entries allows the User to add all the required Contacts. Check each of the Contacts that need to be associated with the Location and click the 'Save' button. 

Edit Selected

Sometimes it can be necessary to alter the existing information on a Location. In order to do this, PCR-360 has the 'Edit Selected' button.  Clicking this opens the record in a 'Manage Contact' form that the User can modify and save.

Deleting an Association

Selecting the 'Delete Selected' button  from this Grid does not delete the contact entry it merely removes the association.

Table of Contents

Servicing Equipment

This Grid has all the Servicing Equipment (routers, switches, jacks, etc.) associated with a Location.

  1. To 'Add' Servicing Equipment, click the 'Add' button. 
  2. This opens the 'Add New Location' form.
  3. 'Servicing Equipment' is a required field. Select the 'Servicing Equipment' from the picker.
  4. If a 'Service Catalog' is desired, select it from the 'Service Catalog' picker.
  5. Click the 'Save New' button. 

The 'Servicing Equipment' is added to the Grid. Continue adding until all the Servicing Equipment has been Added.

Users can modify the Servicing Equipment with the 'Edit Selected'  and 'Delete Selected'  buttons as necessary.

Table of Contents

Permitted Workers

The 'Permitted Workers' tab is specific to the Locations Catalog. The functionality of this tab allows an Admin to limit the Workers that can be assigned to a Location.

Add Existing

Using the 'Add Existing' functionality, a User can associate a Worker with a Location. This association allows the Worker to be assigned to the Location and any Children records.

  1. Click the 'Add Existing' button. 
  2. This opens the 'Add New Existing Contacts' form.
  3. Select the Worker(s) to associate with the Location.
  4. Click the 'Save and Close' button. 

The Worker(s) associated with the Location are the only Workers that can be assigned to the Location elsewhere in PCR-360.

Delete Selected

This removes an individual Worker association from the Location record.

  1. Select the Worker association to remove from the Grid.
  2. Click the 'Delete Selected' button. 
  3. The association on the current Location record is removed.
    Note: Removing the association on a Parent record removes it on all Children records as well. If an association is desired on a Child record, it needs to be added manually to the desired record after removing it from the Parent.

Inherited Permissions

This functionality looks up the Tree and shows any Workers who are associated with a Location through Inheritance.

  1. Click the 'Inherited Permissions' button. 
  2. This opens the 'View Inherited Permissions' dialog.
  3. Click the 'OK' button  when finished viewing.

Permit None

This button removes any associated Workers from a Location. This does NOT remove any Inherited Permissions from the Parent record. To use, simply click the 'Permit None' button.  Any Workers that were associated with the Location have that association deleted. The Grid displays: "No Contacts entries may be used with this Locations entry."

To remove the 'Permit None' Status follow these steps:

  1. Select the line in the Grid that says: "No Contacts entries may be used with this Locations entry." 
  2. Click the 'Delete Selected' button. 
  3. The Permit None restriction is removed, and it is possible to associate Workers with the Location again.

Table of Contents

Building Address

The 'Building Address' tab is only available if the Location's 'Type' is a Building.

The 'Building Number' and 'Community Name' fields may be used for internal identification of a Building on an organization's campus. The Community Name is one of the columns in the NENA2 911 format. We provide this field on the building to allow you to control that column in your 911 feed. If you do not specify anything in the Community Name field, the 911 puts the City name in that column of the feed.

The E911 fields are provided if the configuration option USE_E911ENENA2_FIELDS is turned on. These are the fields used for the E911 file export.

The Street Address fields are used for normal postal code Addresses.

Table of Contents

Service Host Permissions

The 'Service Host Permissions' tab is on the Locations Catalog. The functionality of this tab allows an Admin to limit the Service Hosts that can be assigned to a given Location.

Add

Using the 'Add' functionality a User can associate a Service Host Permission with a given Location. This association allows the Service Host to be assigned to the given Location and any Children records.

  1. Click the 'Add' button. 
  2. This opens the 'Add New Service Host Permissions' form.
  3. Select the Service Host(s) that are desired to associate with the given Location.
  4. Click the 'Save and Close' button. 

The Service Host(s) is associated with the given Location and is the only Service Host(s) that can be assigned to the given Location elsewhere in PCR-360.

Delete Selected

This removes a Service Host from the given Location record.

  1. Select the Service Host Permission to remove from the Grid.
  2. Click the 'Delete Selected' button. 
  3. The Permission on the current given Location record is removed.
    Note: Removing the Permission on a Parent record removes it on all Children records as well. If a Permission is desired on a Child record, it needs to be added manually to the desired record after removing it from the Parent.

Inherited Permissions

This functionality looks up the Tree and shows any Service Host Permissions that are associated with a given Location through Inheritance.

  1. Click the 'Inherited Permissions' button. 
  2. This opens the 'View Inherited Permissions' dialog.
  3. Click the 'OK' button  when finished viewing.

Permit None

This button removes any associated Service Host Permissions from a given Location. This does NOT remove any Inherited Permissions from the Parent record. To use, simply click the 'Permit None' button.  Any Service Host Permissions that were associated with the given Location have that Permission deleted. The Grid displays: "No Contacts entries may be used with this Locations entry." 

Note: If 'Permit None' is set on a Parent record, the Children records are similarly limited.

To remove the 'Permit None' Status follow these steps:

  1. Select the line in the Grid that says: "No Contacts entries may be used with this Locations entry." 
  2. Click the 'Delete Selected' button. 
  3. The Permit None restriction is removed, and it is possible to associate Service Host Permissions with the given Location again.

Table of Contents

Locations

The 'Locations' tab serves as an alternative method for displaying all the Children Location of the currently selected Parent record. It provides a list of all Child locations within this Location. Typically, Child records are displayed in the Tree on the left-hand side of the Locations Catalog.

The 'Locations' tab expands the information available about each of the Child records. The User can edit or delete the Child records from here or the Grid. Editing a Child record opens the 'Manage Location' for that record.

Table of Contents

Attachments

The 'Attachments' tab allows Users to attach file(s) (including .pdf, .jpg, .doc, and more) of interest or relevance to the Location by uploading the file(s) into PCR-360.

Uploading a File

To attach one or more files, navigate to the 'Attachments' tab and click the 'Upload File(s)' button  located on the Grid Toolbar above the 'Attachments' Grid. The User is prompted to select the file(s) from their computer to upload. Upon selection of a file(s), the upload begins automatically.

Download File

Allows a User to download a file to their local machine. To download the file, select the file to download and click the 'Download File' button.  Use the download form that opens to specify a location on the local machine to download the file to and click OK. This can be useful to make modifications to a file which can then be re-uploaded.

Open File

This opens the file, if possible, for viewing by the User. To open the file, select the file to view and click the 'Open File' button.  The file opens in a new tab for viewing. No modifications to the original file can be made when opened in this manner.

Edit Selected

Allows the name of the file to be modified within PCR-360. To Edit the name select the file to be edited and click the 'Edit Selected' button.  This opens the 'Manage Attachment' form.

If a User modifies the name of the file, that is the new name that is used when downloading the file. To edit, simply modify the 'Filename:' field and click the 'Save' button. 

Delete Selected

The 'Delete Selected' button  removes the file from PCR-360.

Table of Contents

User Defined Fields

The 'User Defined Fields' tab is only available when there are User Defined Fields set up for Locations in the Admin section

Table of Contents


  • No labels

Help Desk Portal - Email: help@pcr.com - Phone: 616.259.9242