Create, Build, and Adding in PCR360

Overview

This reference page includes documentation on how to quickly create, add, and build information in PCR360. For more information on the sections documented on this page, please visit their specific pages.

How to Add a New Cable

1. Go to Main > Cable > Cable Maintenance.
2. Click the button.
3. Enter a unique Cable Name.
4. Choose a value on the Cable Type drop-down.
5. You may optionally enter the Owner, the Length and Signal Loss for the Cable.
6. Next we are going to specify the capacity of the cable either in terms of pairs or strands, enter the capacity of the
   cable by specifying the Low and High Pair/Strands. (center of screen)
7. Choose the initial Status of the Pairs/Strands for this cable. (Spare, Reserved, Unknown, etc.)
8. You may optionally choose the Type of cable (Voice or Data) from the Type drop-down.
9. Choose the equipment the cable pair/strands originate from (note: the pair/strands in an individual cable can originate
   from different frames/devices) You may enter the frame/device name or chose it from the picker.
10. If known you may also specify the destination frame/device for this pair range.
11. Click the button.

If the destination frame/device is not specified it can be entered later. Any time changes are made here and Save is clicked
the settings will be applied to the specified range of Pairs/Strands.

Any time you access this Cable from this screen you will get a summary section to give you an overview of the Cable.

How to use Service Desk to generate Reports

Navigate to Main > Service Desk > View/Report. Double-click on any corresponding nodes to see a query-only reporting Grid for the corresponding Service Desk entry type.

Reporting functionality for Service Desk entries is included here for convenience. Users will likely generate these queries/reports frequently. Accordingly, these Grids, which also appear within the 'Service Desk' folder in the Reporting section, cannot be modified.

However, all of the functionalities common to all other Grids in terms of reporting apply equally to these reporting Grids. For instance, Users can filter items on the Grid, sort by column, and print Grid reports. For more information on Grid functionality, see the Getting Started section entitled Critical Interfaces: The Grid.

For the Action and Workflow grid reports, if the Service Desk Items is associated with a Project, that information will also be available on the grid.

Build an Escalation

To build an Escalation that will use a Notification:

1. Go to Admin > Escalations/Notifications > Escalations.
2. Click the  button to open the Escalation builder form:
   
3. In the Escalation form, fill in the Required fields:
4. Escalation Name: Give the Escalation a meaningful name.
5. "Workflow Assigned & Manager Follow-up".
6. Start Event: Select a System, User-Defined, or SNMP Event that will begin the Escalation.
7. Must match the Event for the Notification we'll use: "ServiceDesk Item Workflow Assigned".
8. Add an Abort Event:
9. From the Abort Events list, check "'"
10. Sequences: On the Sequences tab, add at least 1 Sequence:
11. Click the  button on the grid's toolbar
12. Fill in required fields:
13. Sequence #: Any positive integer used to set the order of Sequence execution.
14. Type: The type of action taken by the Sequence. (described here)
15. Time To Wait: A time duration (e.g "1h 20m", "1h", "20m", "1", "1.5") that determines how long the Sequence waits to be executed on its turn.
16. Depending on the Type you select, other Required and optional fields will appear.
17. Click the  button.
18. Continue adding Sequences by making changes in the form and clicking the smaller button, or close the form.
19. Close the form.

Create a Project

Navigate to Main > Service Desk > Projects.

1. Click the button.
2. Change the Source if desired.
   
3. Enter the Project Manager.
   
4. Enter a brief description of the Project. This is not required but encouraged.
   
5. Enter the Due Date. If it's not known, it can be entered later.
   
6. If known or needed; enter the Owner, Requestor, and Quoted Amount.
   
   These fields are not Required and can be added later or not at all. Don't forget, the Owner can also be a Department instead of a person (Contact). To make a Dept. Hierarchy, the Owner just toggle the selector and enter the Dept Hierarchy (or  to perform a search).
   
7. Click the button.

At this point, a Project number has been generated in the upper left-hand corner of the screen that can be used to group together Orders. This process is the same regardless of what types of Orders are associate with this project.

Create a Problem

1. Go to Main > Service Desk > Problems.

       2. Click the  button.

       3. Change the Source if desired.
         

      4. Enter the Service Rep into the field.

      5. Enter a brief description of the Problem into the field. This is not Required but encouraged.
         

      6. Enter the Due Date into the field. If it's not known, it can be entered later.

      7. If known or needed, enter Requestor into the field.

      8. If known or needed, enter choose the Owner. The Requestor and Owner fields are not Required and can be added later or not at all. Don't forget, the Owner can also be an Organizational Hierarchy instead of a person. To use a Department Hierarchy as the                      Owner, toggle the radio button.
         

      9. Enter the Dept. Hierarchy (or use the Hierarchy picker to search).

    10. Click the  button.

At this point, you should have a Problem number in the upper left-hand corner of the screen:

 that you use to group together the Incidents.

Create an Estimate

1. Go to Main > Service Desk > Estimates.

       2. Click the  button.

       3. Change the 'Source' in the drop-down if desired.

       4. Choose the 'Service Rep' (if not already populated with your name) into the picker.

       5. If desired enter a brief 'Description' of the Estimate (this is not required but encouraged)

       6. If known or needed enter the Contact or Department into the field.

        Note: The Owner can be either a Contact or Dept. Hierarchy. To select either just toggle the selector and enter the owner (or use the pickerto search).

7. If known or needed, enter Requestor into the field.

8. Click the  button.

An Estimate number will now be displayed in the upper left-hand corner of the screen.

Quick Tick and Quick Tick Type